Tone Wheel and Tone Cabinet Service Company - Hammond and Leslie USA Products
 














NEW!





New Music for December 2018 !




Hammond USA has taken the comments and suggestions about the current product line of
Leslie Speakers from Customers, Dealers and Technicians to heart!

By dealer agreement we are allowed to sell to customers
whom reside "The Greater Los Angeles Area" only!

CUSTOMERS BEWARE!  

Any new Hammond USA or Leslie product sold on eBay or by an internet mail order company
across dealer boundries is considered GRAY MARKET and will have absolutely NO WARRANTY!

Leslie Sales: (310) 643-6656
24 Hour Message Service

Email: For Leslie Sales

Accept no substitutes, if it doesn't bare the logo,
It's not a genuine LESLIE speaker!

The Leslie 122A-NA

Diagram of the Leslie
Model 122NA

Features of the New Leslie 122A-NA

The 122A-NA is specifically designed for older Hammond Organs requiring a separate tone cabinet for sound reproduction, such as the A, BV, CV, B2, C2, B3, C3, RT, RT2, RT3,  



The Leslie 122A-NA has a Custom Molded ABS Horn now with a NEW long life Ball Bearing Assembly and Shock Mount.  This upper horn never needs oiling!




The Leslie 122A-NA has a custom designed Ferro Fluid 100 watt RMS compression driver.

The Leslie 122A-NA has new Whisper Quiet A.C. Motors with Ball Bearings, isolation grommets between the motor mounting base and the adjustment plate which also contributes to quieter operation.  

The Leslie 122A-NA now has manual tension adjustments with no tensioning springs which can stretch the belts and make motor operation noisier as well as create more wear on the motor, horn and rotor bearings.

These ultra-reliable single component motors never need repalcement o-rings, oiling of their bearings or adjustment of the slow motor rim drive operation like the old style dual motor stacks.






The Leslie 122A-NA has a redesigned motor controller board which incorporates its own power transformer and DC supply stages.





The Leslie 122A-NA has a new redesigned 15" bass driver which was modeled after the original Jensen P15LL!







The Leslie 122A-NA has a light Space Age Custom Designed Molded Foam Rotor.

The Leslie 122A-NA now has Long life Ball Bearings for the top and bottom assemblies just like the original!

The Leslie 122A-NA has an all hand crafted all vacuum tube amplifier with 6550 beam power tubes.  This amp is the same as it was when it was introduced in the Leslie 122 in 1963 and has that great sound just like the original!

The Leslie 122XBN

Diagram of the Leslie
Model 122XBN

Features of the New Leslie 122NXB

The 122NXB is electrically identical to the model 122NA, except that its 11-pin connector is designed to interface directly with current Hammand Organs sucn as the New B3, XK2, XK3 and the XK3 System Drawbar Keyboards.



The Leslie 122NXB has a Custom Molded ABS Horn now with a NEW long life Ball Bearing Assembly and Shock Mount.  This upper horn never needs oiling!




The Leslie 122NXB has a custom designed Ferro Fluid 100 watt RMS compression driver.

The Leslie 122NXB has new Whisper Quiet A.C. Motors with Ball Bearings, isolation grommets between the motor mounting base and the adjustment plate which also contributes to quieter operation.  

The Leslie 122NXB now has manual tension adjustments with no tensioning springs which can stretch the belts and make motor operation noisier as well as create more wear on the motor, horn and rotor bearings.

These ultra-reliable single component motors never need replacement o-rings, oiling of their bearings or adjustment of the slow motor rim drive operation like the old style dual motor stacks.






The Leslie 122NXB has a redesigned motor controller board which incorporates its own power transformer and DC supply stages.





The Leslie 122NXB has a new redesigned 15" bass driver which was modeled after the original Jensen P15LL!







The Leslie 122NXB has a light Space Age Custom Designed Molded Foam Rotor.

The Leslie 122NXB now has Long life Ball Bearings for the top and bottom assemblies just like the original!

The Leslie 122NXB has an all hand crafted all vacuum tube amplifier with 6550 beam power tubes.  This amp is electrically identical to the model 122NA which similar to the Leslie 122 amplifier which was originally introduced in 1963 and it has that great sound just like the original!

The Leslie 147A-NA

Diagram of the Leslie
Model 147AN

Features of the New Leslie 147A-NA

The 147A-NA is recommended for single channel organs with self-contained speaker systems, such as Hammond Organ model A-100 and spinet models such as M, M-2, M3, M-100 and L-100.



The Leslie 147A-NA has a Custom Molded ABS Horn now with a NEW long life Ball Bearing Assembly and Shock Mount.  This upper horn never needs oiling!




The Leslie 147A-NA has a custom designed Ferro Fluid 100 watt RMS compression driver.

The Leslie 147A-NA has new Whisper Quiet A.C. Motors with Ball Bearings, isolation grommets between the motor mounting base and the adjustment plate which also contributes to quieter operation.  

The Leslie 147A-NA now has manual tension adjustments with no tensioning springs which can stretch the belts and make motor operation noisier as well as create more wear on the motor, horn and rotor bearings.

These ultra-reliable single component motors never need replacement o-rings, oiling of their bearings or adjustment of the slow motor rim drive operation like the old style dual motor stacks.






The Leslie 147A-NA has a redesigned motor controller board which incorporates its own power transformer and DC supply stages.





The Leslie 147A-NA has a new redesigned 15" bass driver which was modeled after the original Jensen P15LL!







The Leslie 147A-NA has a light Space Age Custom Designed Molded Foam Rotor.

The Leslie 147A-NA now has Long life Ball Bearings for the top and bottom assemblies just like the original!

The Leslie 147A-NA has an all hand crafted all vacuum tube amplifier with 6550 beam power tubes.  This amp is electrically identical to the model 147A and 147 amplifier which was originally introduced in 1963 and it has that great sound just like the original!

2101, 2121 and the Leslie 21 System MkII




The Leslie 21 System MkII
Diagram of the Leslie model 2101
Diagram of the Leslie Model 2121 MkII

The Leslie 21 System MkII
The Leslie 21 System is a totally new design in the Leslie line, both in it's bolt rugged cabinet styling as well as the new generation of electronic engineering it embodies.  This Leslie is designed for both the professional musician as well as for home use.

Total combined power output of the Leslie 2101 and Leslie 2121 is a thundering 350WRMS.

Features of the New 2101, 2121 and the Leslie 21 System MkII



The Leslie 2101 is a complete stand-alone unit.  This versatile Leslie can be connected to any keyboard or organ requiring an amplifier with a single-channel input or muli-channel inputs.  This unit contains two stationary channels, namely stationary left and right, and a rotary channels. Each of the stationary and rotary channels is powered by a 50WRMS amplifier for a total power output of 150WRMS.  An 11-pin Leslie socket and 1/4" input jacks are provided for the Line inputs.  This enables an easy connection to keyboards, organs and guitars.

The musician can adjust the slow and fast speed, the rise and fall time, as well the brake time and the settings can be saved.  A MIDI terminal enables control of many of the Leslie functions from your organ or keyoboard.  Best of all, it maintains the traditional Leslie sound.






Need more power!
Additonal Lesie 2101s and 2121s can be stacked to meet all your performance needs.
The Leslie 2121 is a high-powered stationary unit, specifically designed to complement the Leslie 2101.  When performing before a large audience, or simply, when you desire a lot more depth in your sound, the Leslie 2121 is a perfect choice.   This Leslie features a two-channel amplifier.  The bass channel contains a 50WRMS amplifier and a high efficiency horn tweeter.  This unit is engineered to provide a tremendous sound output without distortion, reproducing very high and low frequencies with amazing fidelity.  The Leslie 2121 also has separate volume, bass and treble controls.

To facilitate easy connection to your musical instrument, 1/4" input jacks are provided.  Input #1 is specially designed to work with an external microphone.  An XLR type input jack is provided.  The Leslie 2121 is designed for travel.  The cabinet has a high impact, black leather-like finish with corner protectors.  Rugged casters have also been provided to assist you in your transport of your Leslie 21.




The Leslie 2101 and 21 System has a Custom Molded ABS Horn now with a NEW long life Ball Bearing Assembly and Shock Mount.  This upper horn never needs oiling!


Please Contact us for pricing or audition of these products.









Tone Wheel And Tone Cabinet Service Company
Optimize for higher ranking FREE  DIY Meta Tags! Brought to you by ineedhits!